Conveyor Systems

Rotec pioneered concrete placement with our conveyor systems. This original concept is now the proven method for RCC and conventional dams and can be customized for virtually any job.

Port-o-Belt Conveyors:

The Port-o-Belt conveyor is made of lightweight aluminum extrusion and comes in two belt sizes. The 18” (457 mm) belt width can handle a max capacity of 6 yd3/min (4.6 m3/min), while the 24” (610 mm) belt width can handle a max capacity of 9 yd3/min (6.9 m3/min).

Type 2A Conveyors:

Type 2A is a steel truss conveyor made to clear larger spans between supports. This system comes in 30” (762 mm) and 36” (915 mm) belt widths and can clear lengths up to 278 ft (85 m) between supports.

Magnum Conveyors:

The Magnum conveyor is a large capacity version of the Port-o-Belt and made to clear greater lengths between supports. This system comes in 24” (610 mm), 30” (762 mm) and 36” (915 mm) belt widths, clearing lengths up to 200 ft (61 m).

RCC System:

The full RCC System is a combination of Rotec products that transports RCC directly from the plant to the final point of placement. The line conveyors and In Pour Post System transport concrete over any terrain to the final placing equipment (Crawler Placer or Creter Crane). This allows for very accurate placement, resulting in minimal spreading time and maximum production.

Download a Brochure